The Metal Milling and drilling machine is one of the main mechanical processing equipment. The method of machining workpiece with milling cutter on milling drilling machine is called milling. It can be used to process plane, step, bevel, groove, forming surface, gear and cutting off, etc.
The Metal Milling and drilling machine is a three-axis linkage machine tool, which can realize drilling, milling, boring and reaming respectively, which can realize coordinate boring, and can accurately and efficiently complete the automatic processing of various 3D complex curved surfaces such as template, die, arc groove, etc. Its mechanical part includes machine body, column, spindle, feed mechanism and other mechanical parts.
1. When installing workpieces, fixtures and accessories on the milling machine. Do not hesitate to clear and wipe the iron pin and dirt on the table and fixture or accessory installation surface, so as to avoid affecting the machining accuracy.
2. At the end of the work. The milling cutter shall be separated from the workpiece, and the handle shall be placed in the neutral position, and the working state of the milling machine, milling cutter and fixture shall be generally inspected; then, the power supply shall be cut off, the milling machine shall be cleaned, and the shift handover shall be conducted after the lubricating oil is poured on the guide rail surface.
3. Do a good job in the maintenance of milling machine. The working table and guide surface of milling machine are accurate surfaces. To prevent the impact and collision of heavy objects, wood blocks should be padded on the table surface in case of heavy objects or rough rough rough surface, and they should be placed lightly. If abnormal conditions such as noise in the gearbox of milling machine and heating of main shaft bearing are found, stop the machine immediately and send out faults. Do not force to continue working. Check and plan maintenance of milling machine according to regulations.
