First of all, a storage condition of WEDM working fluid needs to be stored in a cool and ventilated place, not exposed to the sun. For example, in the high temperature weather in summer, if emulsion or emulsified oil is used, it will stink after 15 to 20 days, and bacteria will breed. In this way, it can no longer be used, which is harmful to the environment and people. In addition to summer, in other seasons, the average service life of water-soluble WEDM fluid can be used for 3-4 months. The water-based working fluid of WEDM can be recycled, so its service life and cost performance ratio are much higher than that of emulsified oil. Moreover, WEDM fluid is zero emission, which is non polluting to the environment and harmless to human body. So in this era of environmental protection, there is no doubt that wire cutting fluid is really the gospel of environmental protection.
Tips for the use of water-based wire cutting fluid: it needs to be fully mixed before pouring into the water tank for use, and must be in strict accordance with the instructions on the barrel, because the wrong ratio may lead to: 1, rust. 2, more bubbles. 3. Poor excretion. 4. Efficiency and smoothness can not give full play to the advantages of water-based working fluid.
The above is the comparison of emulsion oil and water-based working fluid used in summer for medium wire cutting machine tools, hoping to help those who are worried about what kind of wire cutting working fluid to purchase or those who do not know emulsion oil and water-based working fluid.
