Machining center is a highly automatic multi-function CNC machine tool with tool magazine and automatic tool changing device. Therefore, it needs regular maintenance to extend its service life.
Mechanical part:
1. Check the status of lubrication system and pressure gauge, clean the filter screen of lubrication system, change the lubricating oil and dredge the oil circuit
2. Check the air system, clean the air filter screen and eliminate the leakage of pressure gas.
3. Check the liquid system, clean the filter, clean the oil tank, change or filter the oil. If possible, replace the seal.
4. Fasten all transmission parts and replace defective standard parts.
5. Grease lubrication parts, according to the requirements, add grease
6. Clean and clean all transmission surfaces
7. Check the status of tool magazine and manipulator, analyze the wear status of manipulator, and put forward replacement suggestions to customers.
8. Repair the damaged parts of external components.
9. Check the condition of the protective cover. Feedback information to customers accurately.
Electrical part:
10. Clean the electrical components in the control cabinet, and check and tighten the fastening status of the terminals.
11. Clean the control module, circuit board, fan, air filter and cooling device of CNC system
12. Clean the servo motor fan blades.
13. Clean the internal components of operation panel, circuit board and fan. Check the fastening status of connectors.
If you want the machine to work stably and use for a long time, you need to check its maintenance in time. I hope the above points can help the majority of users.
